Related Products - Products - Home Control - Home Controllers

 007 Systems Flex Home Automation controller kit

• Features
  
• Videos
• Specs
• Links
• Includes
• Requirements

<

>

• The Flex is very powerful Pi computer and case about the size of a mobile phone.
• The Flex Kit comes with everything you need in a controller to get started with home automation and control.
• With 4 Gigs of DRAM and up to 128 Gigs of storage memory, the Flex can handle almost any home control and automation application you can throw at it, including large homes.
  
• Flex uses a very secure Operating System called Linux.
  No Microsoft's Windows to maintain here.
• You can change your OS or controller software very quickly.
• The Flex comes preloaded with the home controller software of your choice.
• Backup and copy your entire Flex memory card to another and have an instant backup if the original card ever fails.
• Get an optional 10' Z-Wave Stick extension cable, to move the Z-Wave stick away from the Flex controller for better signal transmission and reception to your Z-Wave devices.
• You can download and install different Home Controller software packages for free. Some require a license to use fully.
• The Flex has all of it's wired connections out of the back of the device making it much more attractive and easy to sit on a desk or shelf.
• The Flex is variable fan and passively cooled and is very quiet.
  

Compare our price and specs with Home Seer HomeTroller PRO!
Computer Hardware

• Processor: Broadcom BCM2711, Quad core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
• RAM: SDRAM (4GB) LPDDR4-3200
• WIFI: 2.4 GHz and 5.0 GHz IEEE 802.11ac
• Bluetooth: 5.0, BLE
• Ethernet: Gigabit
• USB: (2) USB 3.0 ports; (2) USB 2.0 ports
• Micro-SD card slot
• HDMI: (2) × micro-HDMI ports (up to 4kp60 supported)
• Raspberry Pi standard 40 pin GPIO header (Access to header may be reduced due to enclosure)
• 2-lane MIPI DSI display port
• 2-lane MIPI CSI camera port
• 4-pole stereo audio and composite video port
• 5V DC via USB-C connector (minimum 3A*)
• 5V DC via GPIO header (minimum 3A*)
• Flex Case Dimensions 4.1"W x 3.7"D x 1.5"H
• Operating temperature: 0 – 50 degrees C ambient

Z-Wave+ Stick HomeSeer

• Z-Wave Plus Certified
• Protocol: Sigma Serial API
• Built-in 500 Series Z-Wave Module
• Includes ZDK 6.8x Z-Wave Library
• Field-upgradable Firmware
• Supports 908.42 mhz (US) Z-Wave frequency
• Compatibility: Any Z-Wave certified smart home software or hub (including all HomeSeer systems) running under Linux or Windows 7 (or higher). 

Power Supply

• Input:AC 100-240V/ 50-60Hz ;Output:DC 5V/3000mA
• ON/OFF Switch built into the cable
• Cable Length: 1~1.5 Meter

Memory Card

• 32GB or 64GB or 128GB Samsung Pro Endurance Class 10 U1 Micro SDXC Card

• (1) Flex Computer
• (1) Memory Card Pro Endurance Class 10 Micro SDXC
• (1) Power Supply 120VAC 3A US
• (1) Z-Wave+ Stick USB HomeSeer US
• (1) Ethernet Cable Cat6 5 Feet
• Operating System or Control / Automation System (A license may be required for full software operability)
  
• Ready To Go Instructions

1. A 120vac power.
   
2. A Router with DHCP ON (most routers already have this on).
   
3. Ethernet Network Access.
   
4. Another computer on the same network as your Flex
   OR a USB Keyboard, Mouse and HDMI Monitor
   

007 Systems Flex Home Automation Controller Kit

$299.99

View Details

The most flexible Home Automation Controller in existence
The new Flex Home Controller and the included kit is all you need.
The Flex Controller is a very small, quiet and powerful computer that comes loaded with the Home Controller system of your choice. The beauty of the Flex is that you can change the home control system or operating system anytime you want without buying new hardware.

Instead of buying a dedicated home controller that restricts you to their home control system, try the Flex controller. It can host many different home controller packages as well as programs that operate in Linux giving it much more versatility.

The Flex comes with all of the software you need so you are ready to go when you open the box and plug it into your network.

You may want to change your home controller software down the road. With the Flex, you will not have buy a new hardware controller.
If you decide you want to change your controller software, just download the new software, flash it and you are ready to go.

The Flex and these home automation packages work great together.

• HomeSeer
• Home Assistant
• OpenHab
• DomoticZ
• OpenNetHome

And compare the Flex's impressive hardware specs. Compare our specifications in our specs tab.

Order options; Just choose the memory size you want and which controller software you want and any accessories like the extension or adapter cables and let us put it all together for you.
When you receive your flex, you will be ready to start your home automation project and you will not have to mess with installing anything yourself.

Compare all of our Home Automation Controllers here.

---