Their MultiSensor 6 (MS6) will now;
Installation: Aeotec claims the new MS6 is now 70% smaller and 50% less weight than their previous versions. They also claim you can install the unit with their 2 sided tape from 3M. The new sensor comes with 3 new installation products.
For the easiest installation, the new MS6 can also be placed on a bookshelf. See if you can find it on the bookshelf image below. The new shape of the MS6 is sort of cube shaped and smaller at the base. It seems a little hard to mount to corners up near the ceiling, even with the new angle bracket, but we will see when we get one. I do like the new recessed mounting box. The new MS6 can also be powered with a USB cable for mains power, So if you do not like to change batteries, you can power the device with a power cable. It seems more and more companies are going to USB power. Notes: The MS6 has an LED to give visual notifications. Apparently you have the ability to turn it off if you do not want the LED blinking. Specs: Size - 42mm at base Weight - 74 grams Battery Life - 2+ years (CR123 x 2) AES 128 bit wireless encryption Z-Wave Gen 5 Z-Wave 150 meter range (point to point) What is Included: (1) MultiSensor 6 (1) Recessor Mount (1) Mounting Arm (1) 1.5 meter USB cable (1) 2 Sided 3M Tape (2) Batteries
0 Comments
|
Archives
January 2020
Categories
All
|