It seems there are some differences on how some mobile devices handle their GPS locations with other apps on that device therefore your experience with a geofence can be different depending on the device and service you use.
We suggest using a minimum radius of 150m but if you are experiencing your geofence triggering when you are inside your fence, or delays in scenes triggering when entering or leaving, we suggest you take it to 300m or more. This will give your control system time to get the signal that you have entered or left your geofence.
It is pretty easy to do this.

1. Open your Vera Mobile app on the mobile device you use to leave and enter your geofence.
2. Select "Menu" (Top Left)
3. Select "Geofence"
4. Tap on the pencil icon to the right of your geofence.
5. Use the slider to adjust the radius of the geofence or type the number you would like the radius to be.
   In this case we just type 300 in the box to the left of the slider.
6. Click "Save" on the bottom of the geofence page.
7. Your done.

​If you would like to see how big your fence is now become, hit the "Back" (Top Left) after saving and you can see the map and how big your fence now is in relation to the roads near your home.

If you would like to turn on of off notifications when entering and leaving your fence, check the "Notify" box.
Make sure the "This is my home" box is checked if you would like mode changes based on actions with this geofence.

This directional guide will instruct you on how to physically install the Envisalink EVL3 or EVL4 into an alarm system, setting it up on your network, how to use it, setting up your Vera pertaining to the EVL and optional eyez-on.com account setup.  
Installing an Envisalink EVL to your home alarm system and controlling it with your home controller and or, your mobile device will give you the ability to;

• Control - Arm (Stay or Away), Force Arm, Disarm and Bypass from anywhere. Trigger PGM’s
• Automate - Your alarm system will automatically arm itself when you leave your home and disarm itself when you arrive.
• Monitor - See the status of any zone connected to your alarm system.

This combination of hardware and software is the ultimate in security and convenience.
Oh yea, did I mention there were NO monthly fees?
What You Will Need:

• Alarm system (In the following directions we are using a DSC 1864 system)
• Envisalink EVL (Or similar)
• Vera Controller
• Network Router with DHCP setup on it.
• Computer on the same network as your EVL and Vera for installation and setting up.
• Broadband Internet Access at EVL location.

​In this sample video we show you how we install our Outdoor Z-Wave Motion Wall Lighting.

If you would like more information on this and other outdoor Z-Wave Motion Lighting including our line of security flood lights please click on the link below.
http://www.007systems.com/z-wave-outdoor-motion-lights.html

If you would like the docs form of this video, click here.
https://docs.google.com/document/d/1RIjDocaMiWm09vpM_Tvx7LESCLBjbViGe8etcyD_n-A/edit?usp=sharing

Hi everyone.
We now offer new models of our exclusive Z-Wave Plus Outdoor Motion Flood and Wall Lights.

Not only do we now offer colors we now offer an all metal flood and a great looking carriage, decorative and very durable wall light.  

Of course all of these motion lights come with a Z-Wave Plus interface using the latest upgraded 500 chipset to connect to your favorite Z-Wave controller. We recommend and use Vera controllers but they will work with almost all Z-Wave controllers.

These lights all have a built in motion sensor which makes them great for driveways, walkway entry's or back decks, they also have a Z-Wave interface so your controller can do things like notify you, turn on other lights or trigger any scene you would like. 

If you are looking for an effective outdoor Z-Wave motion sensor or you would like to get create some decorative security around your home, these Z-Wave motion lights have you covered.

If you would like to learn more or see our lineup, please click here.

Ever wanted to automatically close your garage door or lock your doors or turn off your water or make sure all your lights are turned off when you leave your home?

How about automatically turning on your driveway lights or disarming your alarm or turning up the heater when you arrive, again all automatically and you don't even have to pick up your mobile phone.

Well this can all easily be done and very inexpensively I might add. In fact, if you already have a Vera controller and your devices already installed, it is totally free.
The technology is called Geofencing and we tell you how to trigger scenes with your Vera using this technology.
You will need the "House Modes Plug-in" as described in this video.
​If you are not sure how to set up a Geofence, don't worry. We have a complete step by step video here.

  Want to know how to automatically arm your alarm by driving down your driveway?
​
In this instructional video, we show what a geofence is and how to set it up on your Vera Home Automation and Control System.
After setting up your own geofence, your home will automatically do things like turn of the lights, lock the doors and arm the alarm automatically when you leave your home and do the opposite when you come home.

If you are interested in getting a Vera home control / automation system for yourself, you can find them here. These controllers start at less than 100 dollars.

We tested Vera's new Geofence feature only to find out that it works. 
In this video we show you how it works when you travel in and out of your geofence.

Like any other building, your home or business keeps you safe and warm to work and live. You worry about the things that cause harm or damage to your family or your home. This is why you get alarm systems or insurance.
Shouldn't water control be a concern too?

Water Control is the ability to control the water both on and off, coming into our property. It Is something most of us never think about. Unfortunately because of the costs of the damage that may occur when a water line breaks, we all should, not only think about it but prepare for it. This is especially true if you own a vacation home or business that you only use occasionally.
You might be thinking "But I turn off the water when I am not there". That is great, but what will happen if you forget to turn off the water prior to leaving, of if you are up for the weekend and you are out on the boat for the day? A leak can happen at any time. When it does, if you are not there to turn off the water immediately, there can be some major water damage.
Some interesting facts about water damage.

• Water damage is something that can happen at any time.
  Since your water lines are pressurized, usually 50-70 pounds per square inch. A water line or water hose can burst at any time. 
• It does not take a natural disaster to cause it.
  Water lines can break or leak when nothing happens. The age of materials is the leading cause of failures, but even temperature fluctuations can cause a water hose to leak or burst.
• It can happen to newer and older homes.
  Poor construction or move in damage can cause water line breaks too.
• I have seen water leaks cause damage slowly .
  A cracked water line behind a refrigerator can spray a mist on a wall for years and cause black mold.
• Water damage can run into the tens of thousands of dollars.
• Water damage may not be covered under your homeowners insurance.
  If the water damage is slow and unobserved, most insurance companies do not cover this type of damage.

All of these problems can be mitigated or even eliminated with a properly installed Automated Water Control System.

​Now lets talk about you and your home or business and what to look for and finally how to fix it.
Your Home or Business
The first thing to keep in mind is that all of your water pipes are pressurized and filled with water. Any of these pipes can leak or burst at any time, but the places you are more likely to see a water leak are places like,

• Under your sinks
• Behind your clothes washer
• Behind your refrigerator
• Near your water heater
• Under your jetted bath tub
• In your basement or sub flooring where water pipes or drains are
• Under your dishwasher
• Behind Toilets
• Or any other place there are pipes or soft hoses filled with pressurized water.

Take a stroll around your home or office. Look at these places and think what would happen if a water line broke in these locations and how much it would cost to fix the damage caused, especially if you did not catch the leak for several days.
These are the places you should think of placing the first line of defense in your water shut off strategy. The Water sensor.

These three components comprise a Water Control system.  
You may have a controller already and can easily add the sensors and a valve motor to your existing system to complete your own water control system.

Now that you have your home and water control systems installed you can do some really interesting things with it.
If this is a second / Vacation home and if you do not have a stop waste valve controlling your system, you can program your system to automatically turn off your water when you leave your home and on when you arrive. This will make those weekends at the lake house, easier because you will not have to do it yourself and take the pain out of forgetting to turn it off.
I like to do this with electric locks that are paired to the home controller system.
If you would like to learn more about water control and each of the parts described above, please click on the links 

If you are building a home and are interested in installing a Water Control System in it, I would think about routing your main water supply pipe through a garage wall or some other accessible and dry area and putting a main water shutoff valve in that area maybe in the wall with an accessible cover it for easy access. You will also need a 110V outlet for the power to this motor in this area.
I recommend an accessible area because at one point you might need to replace the valve or motor. It is much easier to do this in an accessible area than it is laying on your back in the dirt under you home.
If you live in a colder climate, you might want to think about installing two of these valves to make a stop and drain (stop and waste) system to automatically drain the water in your pipes to prevent them from freezing and bursting the pipes. One valve to turn off the water and another valve to drain the water from the closed system.

​The benefits of having this system are, the ease of using it manually and if you have it set up as a emergency automatic shutoff system, you will never have to think about it.
With these three devices installed and properly programmed, you will have an extra safety net covering your homes water system and you can rest assured you will probably never have to experience any extensive water damage to your home or business.

We carry these components separately or as a Water Control Kit.

I hope this article informed you on the the benefits of having a water control system in your home or office. If you have any questions, please contact us or ask here.

​Learn how to make your Vera UI7 change modes automatically.