Changing your Geofence Radius.

If you are finding your geofence is triggering when you are home or there is a substantial delay in your geofence triggering a scene, we suggest you increase the size of your geofence radius to compensate for this.

It seems there are some differences on how some mobile devices handle their GPS locations with other apps on that device therefore your experience with a geofence can be different depending on the device and service you use.
We suggest using a minimum radius of 150m but if you are experiencing your geofence triggering when you are inside your fence, or delays in scenes triggering when entering or leaving, we suggest you take it to 300m or more. This will give your control system time to get the signal that you have entered or left your geofence.
It is pretty easy to do this.

1. Open your Vera Mobile app on the mobile device you use to leave and enter your geofence.
2. Select "Menu" (Top Left)
3. Select "Geofence"
4. Tap on the pencil icon to the right of your geofence.
5. Use the slider to adjust the radius of the geofence or type the number you would like the radius to be.
   In this case we just type 300 in the box to the left of the slider.
6. Click "Save" on the bottom of the geofence page.
7. Your done.

​If you would like to see how big your fence is now become, hit the "Back" (Top Left) after saving and you can see the map and how big your fence now is in relation to the roads near your home.

If you would like to turn on of off notifications when entering and leaving your fence, check the "Notify" box.
Make sure the "This is my home" box is checked if you would like mode changes based on actions with this geofence.