How to setup the FLS100 Z-Wave Outdoor Motion sensor with the Smartthings controller Hub

By default, if you add the sensor to ST without the device handler, you will not be able to trigger on motion, you can only turn the load on and off. The device handler adds the following:

• Button to turn the load on/off and display the status of the light
• Motion tile that tells you if motion is detected
• LUX tile that shows the current light level

For triggering actions, you can use the built-in automation to trigger on motion and you can set an action to control the load.
If you need to trigger on the light level, install the SmartApp named "Smart Lighting". This will allow you to trigger on the device LUX value.  

---

1.  Go to this URL and log in with SmartThings account:
2. ​https://graph-na04-useast2.api.smartthings.com
3. Click on the "My Device Handlers" menu.
4. Click "Create New Device Handler" on the right.
5. Click "From Code".
6. Click here to view the code or download the file below.
   
7. Click "Create" at the bottom.
8. Click "Publish" and select "For Me".
9. Install, or pair the Z-Wave Motion Sensor to your ST controller.
10. You're Done!

smartthingshandler.txt
File Size:	10 kb
File Type:	txt

Download File

---