Related Products - Products - Home Control - Water Control - Water Control Kits - Sensors - Water / Moisture Sensors
Dome Z-Wave Water Sensor (DMWS1)
|
The Dome Z-Wave water sensor works great as a stand alone sensor or part of a complete emergency water shutoff system.
Use the Leak Sensor with your Z-Wave Hub to potentially save thousands of dollars in water damage. Get an alert or turn off your water main when an appliance malfunctions, the toilet leaks, or the sump pump starts to overflow. It also has multiple mounting options and a remote sensor probe, so the Leak Sensor can monitor any water-related appliance or fixture. Use as a stand alone sensor or together with an emergency water shutoff valve motor in a kit for complete water protection. |
- Battery Powered
- Use anywhere in your home without running any wires or looking for power.
- Remote Sensor Probe
For use in tight spaces, sump pumps, or under appliances. - Built In Buzzer
To alert those nearby when water is detected. - Get Notifications of Water Leaks
- Easy Install / Flexible Installation
Use it anywhere - mount on a wall next to a fixture, place it next to a water heater, etc. - Single Tool Installation.
- Z-Wave Plus Enabled
- Easy to Program
- Easy to Use
Install it and forget it. - Use Anywhere
Home, 2nd Home, Vacation Home - Low Profile
To fit underneath appliances and stay out of your way. - WATER RESISTANT
So you don't have to throw it away after one use.
(1) Water Sensor
(1) Sensor Battery
(1) Sensor Probe
(1) Sensor Probe Cradle
Sensor Installation Hardware
(1) Sensor Battery
(1) Sensor Probe
(1) Sensor Probe Cradle
Sensor Installation Hardware
- Vera Edge
- Vera Plus
- SmartThings Hub (custom device handler needed for full functionality, download here)
- Wink and Wink 2
- HomeSeer
- Fibaro Home Center 2
- Fibaro Home Center Lite
- Iris by Lowes
- Logitech Harmony Hub Extender
- Open Z-Wave
- Zipato Z-Wave Zipabox Smart Home Controller
- Zipato ZipaTile Home Automation Controller
Technical Data
- Power supply - Single CR2 3.0V battery
- Working current - 35mA
- Power Consumption - 0.13W
- Operating temperature - 32-104°F (0-40°C)
- Warranty - One Year Parts & Labor
- Sensor Dimensions - 02.63” x 1”
- Radio protocol - Z-Wave (500 series)
- Radio frequency - 908.4 MHz US
- Capabilities
Notifications (Water Alarm)
Binary Sensor (Water)
Audible Alarm - Range - Up to 150’ depending on environment
We also sell these sensors in a Water Control Kit that contains everything you need to automatically turn your water off if there is a water leak then notify you that there was a leak and that the water is off.
We have a section on Water Control if you would like to learn more.
We have a section on Water Control if you would like to learn more.