Enerwave Installable Z-Wave Plus smart Receptacle
|
Transform any home into a connected home with the in-wall Enerwave Z-Wave Plus Smart Meter receptacle. The smart receptacle replaces your existing receptacle to enable wireless control of on/off functions of your home’s lamps and appliances from a Z-Wave controlled outlet.
|
- Z-Wave Plus!
- Perfect Replacement for regular receptacles, 120VAC, 15Amp.
- Wireless Z-Wave technology (Signal Frequency is 908.42 MHz) creates a mesh network for command and control interoperability with other Z-Wave compliant controllers.
- Manual and Remote ON/OFF control of any connected lighting and other electrical load for Z-Wave controlled outlet.
- Tamper-Resistant (TR) receptacles keep you and your family safe from electrical injuries.
- Reduce energy consumption and enjoy Wireless Home Automation.
- Enhance the value and technology of your apartment, condominiums and homes.
- Measures energy usage of any connected appliance/device
- Includes two Free wall plates, screwless and standard wall plate.
Color: White
Voltage: 120VAC, 60Hz
Maximum load: 1000W Incandescent, ½ HP Motor, 1200VA Ballast, 1800W (15A) Resistive
Signal Frequency: 908.42 Mhz (U.S. Z-Wave Standard)
Range: Up to 100 feet in open-air and line of sight distance, depending on obstacles and blocks
Terminations: 3 Terminals for Line, Neutral and Ground
Operation Temperature: 32°F – 104°F (0°C -40 °C), Indoor Use
Standards and Compliance:
Z-Wave Certified
FCC Part 15, Class B
UL, CUL Listed
Warranty: 2 years
Voltage: 120VAC, 60Hz
Maximum load: 1000W Incandescent, ½ HP Motor, 1200VA Ballast, 1800W (15A) Resistive
Signal Frequency: 908.42 Mhz (U.S. Z-Wave Standard)
Range: Up to 100 feet in open-air and line of sight distance, depending on obstacles and blocks
Terminations: 3 Terminals for Line, Neutral and Ground
Operation Temperature: 32°F – 104°F (0°C -40 °C), Indoor Use
Standards and Compliance:
Z-Wave Certified
FCC Part 15, Class B
UL, CUL Listed
Warranty: 2 years

Instructions |
DANGER! SHOCK HAZARD. Read and understand the manufacture instructions before installing. This device is intended for installation in accordance with the National Electric code and local regulations in the United States, or the Canadian Electrical Code and local regulations in Canada. It is recommended that a qualified electrician perform this installation.