Z-Wave Plus smart Thermostat Remotec (ZT-500-US)
A smart thermostat designed with the end user in mind. It combines compatibility with any Z-Wave certified controller or gateway with an incredibly simple and intuitive user interface.
- Support 2 stage heat, 2 stage cool, 2 stage fan.
- 24Vac single & two stage conventional heating systems (gas/oil/electric).
- Heat pump systems with up to two stages of heating (electric/gas).
- Zoned forced air and zoned hot water (2 or 3 wire).
- Millivolt systems (12-24Vac or DC source).
- One or two stage cooling systems.
- Hybrid systems.
- Z-Wave Plus compliant (Z-Wave 500 series).
- OTA upgradeable.
- Power source: 4xAA batteries; 24Vac.
- Battery life: up to 1 year.
- RF range: 150ft in typical in-house use.
- Dimension: 160mm (L) x 100mm(W) x 27.5mm (H).
Supported Z-Wave Command Classes
- Z-Wave Plus Info Command Class
- Manufacture Specific Command Class
- Multilevel Sensor Command Class
- Thermostat mode Command Class
- Thermostat Operating State Command Class
- Thermostat Setpoint Command Class
- Thermostat Fan Mode Command Class
- Thermostat Fan State Command Class
- Thermostat Setback Command Class
- Version Command Class
- Firmware Update Command Class
- Device Reset Locally Command Class
- Association Group Information Command Class
- Association Command Class
- Power Level Command Class
- Basic Command Class
- Battery Command Class