Related Products - Products - Home Control - Home Control Accessories - Door & Gate Control - Vehicle gate - Pedestrian Door/Gate
Vehicle Gate Control Automation & Monitoring Z-Wave
So you want to be the only one in your neighborhood to open and close, see the live status of and automate all of your exterior driveway gates with your phone tablet or home automation system?
Well, look no further.
Well, look no further.
Vehicle Gate Control
Vehicle Gate control is usually more difficult for wireless installations because vehicle gates are usually out of the range of your Z-Wave Mesh Network (ZNET) and these gates are usually uncovered and exposed to rain and the elements.
These two problems are usually the reason we leave our gates out of our Control Automation and Monitoring System. (CAMS) Both of these problems can be overcome by running 4 conductors or wires from the gate and motor location to a weather protected location inside your (ZNET). If you can do this, you can get your outside gate into your CAMS. Once the wires are in place and installed to the kit, you will be able to monitor, control and automate your front gate with ease. If you are installing a gate, make sure you have conduit installed for the addition of these wires from the gate and gate motor to a secure dry weather protected location in your home and in your ZNET area. |
|
Our Vehicle Gate Kit includes all of the equipment you will need to get this job done. The kit will connect one of your gates to your CAMS. You can use multiple kits with multiple gates.
The kit includes: (1) Z-Wave Appliance Module (1) RM10 (1) Z-Wave Door Sensor (1) Weatherproof Gate Sensor and Magnet |
|
WARNING: Do not install automation equipment on any motorized door or gate unless you have the latest safety equipment supplied by it's manufacture installed on it, including but not limited to, occupancy sensors, status sensors, reverse sensors and reverse mechanisms.
Use of these parts in controlling an motorized door or gate can be dangerous. Be aware, you are giving control of your electric door motor and door to an electrical device which can trigger your door or gate at any time.
007 Systems takes no responsibility for any damage or injury resulting in the use of these parts.
Use of these parts in controlling an motorized door or gate can be dangerous. Be aware, you are giving control of your electric door motor and door to an electrical device which can trigger your door or gate at any time.
007 Systems takes no responsibility for any damage or injury resulting in the use of these parts.
Please contact us if you have any questions.